Detailed Product Description

. Product: Spray Glue 808

Main Ingredients:

Thermoplastic rubber

Resin 

Solvent oil 6#

 Antioxidant

Technical Data

Executive Standard: GB18583-2001

Viscosity (mpas): 100+30

Solid Content (%): 30+5

Maximum Spray Area: 13-15 sqm/kg

. Features:

   Free from BenzeneToluene and Dimethylbenzene, the yellowish liquid is easy to operate, no thread spraying, powerful bonding, heat-resistant, cold-resistant and aging-resistant.

The guarantee period is 6 months. If the liquid does not metamorphose, it still can be used when it expires the guarantee period.

. Usage

   Apply for large area bolding between materials as sponge, foam, fabric, leather, paper, plastic, metal foil and etc.

Instruction

A.     Pour the glue into the steel tin of the gun, adjust the pressure of the air-compressor to 6-8kg, and keep a distance of 40cm-50cm between the nozzle and the target surface.

B.     If the glue is too thick, it can be diluted by organic solvents like chloroform, Acetone and Ethyl.

C.     Uniformly spray a glue coat of the two target surfaces, leave it for 1-5minutes, then press and bond.

D.     Specified Instructions

1.      Make sure the spray gun is working and not having water in it.

2.      Make sure the operating workshop is in good ventilation.

3.      When operating, stay away from fire and prevent the static. Any operation causing sparks must not be carried out within 50 meter

4.      Clean the surface of the target materials to make sure no greasedust or other stains.

5.      Please apply the glue uniformly on the target surfaces.

a.     The nozzle of the gun and the surface should form a 45 degree angle.

b.     The spray distance (the gun and the surface) better be 0.5 meter.

c.     The normal pressure of the gun should be 6-8 kg.

d.     The spray should be like fan-shape or minute particles.

e.      Glue should not be too thick, best coating the surface evenly.

f.      Steadily and uniformly move the gun in operation.

6.      After applying the glue on the surface, leave it to dry for 1-5minutes (or when the applied glue coat is not sticky to your hand), then it is okay to bond.

7.      Pressing the surface properly can get better result.

8.      Certain materials or craftworks require the glue coat being heated or pressed as per the users requirement.

9.      Clean the gun when it is not used.

10.  Influences of improper spraying.

a.     A glue coat which is too thin will lead to weak adhesion

b.     A glue coat which is too thick results in high cost slow drying and glue accumulation.

c.     Uneven glue coat will cause accumulation and partial cracks.

. Warning

A.     Please try to test if the product is suitable for your materials before large quantity in use.

B.     The product is flammables, sealed and stored in cool places.

C.     It is not appropriate to operate the glue spraying at a long time for the people who suffer from nerve system troubles, anemia, hypertension, liver troubles, kidney troubles, the pregnant, the feeding period mother and etc.

D.     Keep the product away from the kid, no swallowing of the good.

E.      Please keep the product in good ventilation and away from fire when at transportation and in storage.

. Precaution and First aid

A. Protect equipments like Smock, hat, plastic gloves, guarding glasses and respirator: the product can degrease the skin when the skin is in long contact with the glue.

B. Will the glue operator please take physical examination periodically. Clean the glue-staining hand or skin with white gas or water.

C. Incautious swallowing of the glue, go to Hospital Emergency immediately.

D. Glue into eyes, wash the eyes for at least 10 minutes and apply medical treatment or send the injured to the hospital.

. Measure for preventing Static electricity

When the air is dry, the workshop should sustain certain humidity and the worker should put their hands on the ground for 5-15secs every 10-20mins to conduct their static electricity to the ground or wear our companys Static Ring.

. Fire protection measure

Flammables may be ignited by static electricity or fire. Put out the fire with powder, foam, or carbon dioxide fire extinguisher (NEVER USE WATER).

leaking handling

    Block the crack to stop the leaking, cover the leaks with sand or soil, and bury the mixtures.

   Never pour them into the river.